View DBA250_366352.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN2145C
DBA250
Diffused Junction Silicon Diode
DBA250
25.0A Single-Phase Bridge Rectifier
Features
* * * *
Package Dimensions
unit : mm 1162
[DBA250]
Plastic molded structure. Glass passivation for high reliability. Peak reverse voltage : VRM=200, 600V. Average rectified current : IO=25.0A.
9
32 max 18
7.2 6.35
4.9
0.8
2.4
14.4 32 max
11 25 max
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Peak Reverse Voltage Average Recitified Current Surge Forward Current Junction Temperature Storage Temperature Insulation Voltage Symbol VRM IO IFSM Tj Tstg VIS Conditions Ta=40C Ta=40C, with a 300!300!3.0mm3 Cu fin 50Hz sine wave, 1 cycle DBA250C 200 DBA250G 600 6.0 25.0 400 150 --40 to +150 2 Unit V A A A C C kV
Electrical Characteristics at Ta=25C
Parameter Forward Voltage Reverse Current Thermal Resistance Note : Tightening torque : 0.98N*m max. NoteT : Per constituent element of bridge. Symbol VF IR Rth(j-c) Conditions IF=12.5AT VR : At each VRMT Junction-Case min Ratings typ max 1.05 10 1.5 Unit V A C/W
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
41000 GI IM / 52098 HA (KT) / 82595 GI (KOTO) 3089 MO, TS No.2145-1/2
DBA250
40
IO -- Ta
300!300!3.0mm3 Cu fin
5 3
IF -- VF
Average Rectified Current, IO -- A
32
Forward Current, IF -- A
2
24
10 7 5 3 2
Re
16
sis
8
0 0
cit ive oa Without loa d d fin Resisti ve, ind uctive load Capacit ive load
40 80 120 160 200 ID01187
Ca
tiv e,
pa
in
du
cti ve l
1.0 0.4
0.6
0.8
25C
1.0
With fin
Ta= 150 C
1.2
1.4 ID01188
Ambient Temperature, Ta -- C
400
IFSM -- n
Ta=25C
Forward Voltage, VF -- V
Surge Foward Current, IFSM -- A
300
50
200
Hz
100 1.0
2
3
5
7
10
2
3
5
Number of Cycles at 50Hz, n
7 100 ID01189
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 2000. Specifications and information herein are subject to change without notice.
PS No.2145-2/2

▲Up To Search▲

Price & Availability of DBA250

	To Download DBA250 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .